Creality 3D

CR-20 pro

Improve version of the CR20, with even better electronics auto bed-leveling and almost no assembly
  • Build volume: 220x220x250mm
  • Heated bed: Yes
  • LCD+SD card: Yes
  • Materials: PLA, PETG, ABS
  • Filament diameter: 1.75mm
  • Auto bed leveling: Yes
Stock - NL: 2
€ 237.49  incl VAT In stock
from € 249.99
Others also bought:
Adhesion spray 400ml|ABS, PLA and PETG
3DLAC
Adhesion spray 400ml
ABS, PLA and PETG
Your best defense against warping and prints loosening from the bed
€ 11.50
USB A to Mini USB cable|2 Meters / USB 2.0
USB A to Mini USB cable
2 Meters / USB 2.0
Connect different electronics to your computer with this USB A to Mini USB 2.0 cable
€ 6.95
High-quality PLA filament|Black 1.75 mm / 1 kg
REAL Filament
High-quality PLA filament
Black 1.75 mm / 1 kg
Best choice PLA filament for the best results
€ 29.95
3D Printer Enclosure (Medium)|76x65x72 cm
Creality 3D
3D Printer Enclosure (Medium)
76x65x72 cm
Protects 3D prints against drafts and reduces smells
€ 84.99

Product description

Upgrade to the popular CR-20 3D Printer. Comes with graphical display, heated bed and SD-card. Requires only a few minutes of basic assembly. No hardware experience required!

The CR-20 Pro adds several nice features on top of the already-impressive CR-20:

  • The power supply has been upgraded to a high quality 24V MeanWell supply
  • High precison BT touch z-height sensor mounted next to the toolhead compartment, paired with..
  • Bed leveling autocalibration routine initiated from graphical controller
  • Magnetic sticker sheet securely attaches the build surface to the bedplate

The CR-20 Pro kit is professionally packaged and contains two logically-divided sections (the horizontal and vertical frame) that can be assembled in minutes using only a few screws; the tools are included, and hardware experience is not required. Most of the frame is made from black aluminum V-slot extrusions and in combination with the bowden system for the extruder, results in an efficient, sturdy frame with 0.1mm Z-axis print precision. The dual sided lead screws on the Z-axis ensure good layer stacking and thus high quality prints. The new v2.1 controller board makes it a stable and smooth printing experience, with a convenient menu system navigable using the sturdy dial. The printer includes a heated bed which reduces the risk of print warping or detachment during printing, and the graphical display + SD slot allows for standalone printing. The heated bed's flexible, magnetically-attached print surface is easy to remove from the rest of the bed plate, allowing for faster and easier 3D print removal.

For new 3D printing enthusiasts: 3D printers runs off of so-called "gcode" files, which are generated from free software slicers such as Slic3r or Cura. Most modern printers (including Crealitys) can run their gcode prints either via an integrated SD or mini-USB slot for stand-alone printing, or from a seperate PC or laptop via the USB slot. In case of power failure, Creality's printers have a "recovery" mode that allows for resuming the print from the LCD interface once power is restored, an essential sanity-saving feature to avoid the frustration of wasted time and filament.

A small "starter" spool of filament is included in the kit, but it won't last long! We recommend including in your purchase a larger spool of Real filament or a multi-color PLA sample pack to assist you in your upcoming exploration of all the colorful things you can print with your new Creality!

The kit includes the following items:

  • Power cable
  • USB cable
  • Spare pneufit coupling
  • Spare nozzle
  • Spatula
  • Filament cutter
  • USB-stick with SD card
  • Sample PLA for testing
  • Assembly tools

Documentation

Specifications

General properties
sku CR20PRO
gtin 8719345011122
Series CR
Type CR-20 Pro
3D printer properties
Buildvolume

The maximum volume what can be 3D printed with this machine. This normally is almost the size of the printbed times the height the head can be above the bed.

22x22x25 cm
Printer Geometry Cartesian
Layer resolution 0.1 mm
Number of extruders 1
Nozzle diameter 0.4 mm
Filament types 311,313
Filament diameter 1.75 mm
Hot-end type Creality Hotend
Max. hot-end temperature 260 °C
Extruder type

Bowden printers feed filament through a tube as opposed to Direct Drive systems. This adds important advantages (faster printing) and disadvantages (higher filament retraction settings). You can find more information on Direct Drive and Bowden systems, Click here

Bowden
Max. heated bed. temp. 100 °C
Type of 3D printer FDM/FFF
Dimensions
Product Dimensions 420x410x470 mm
Features
Display type Graphical LCD
Type of control interface Rotary encoder with push button
SD-card

A SD Card in your printer will allow you to store prints and print them directly from SD. This is more reliable than a USB connection and allows you to power down your computer.

Heated bed

A heated bed is important to reduce Warping and have a better adhesion of the 3D print to the print bed.

More info

Auto Bed Leveling

The auto bed leveling feature will probe the buildplate on a few different points. This allows the 3D printer to detect deviations in the buildplate and adjust the print accordingly. This makes is much easier to start a print as you don't have to manually adjust the bed position.

Electrical specifications
Input voltage 110/240 V
Operating voltage 24 V
€ 237.49  incl VAT In stock
from € 249.99

Spare PartsSpare Parts

Find useful replacement parts and components for the CR-20 pro. Ensure smooth operation and keep your CR-20 pro in the best condition with our series of spare parts. Easily order spare parts for replacement or to store in your inventory.

Extruder parts

104NT-4-R025H42G Semitec Thermistor 100K - NTC
High heat resistance and sensitive 100K Thermistor
  € 3.75
Thermistor 100K pre-crimped wire (1m)
ReprapWorld
Easy assembly of you extruder
  € 5.99
Brass Nozzle - MK8|0.40 mm / 1.75 mm
ReprapWorld
Generic MK8 nozzle compatible with many 3D printers
  € 7.25
Ceramic Heater Cartridge ( 150 cm)|24 V / 40 W / Red
Heating element compatible with most extruders.
  € 6.75
PC4-M10 - Push Fitting for 4mm PTFE tubing
ReprapWorld
Straight fitting for PTFE tubing, compatible with Creality hotends
  € 2.99
CR-10S / CR-20 (Pro) mainboard
Creality 3D
Original Creality 3D mainboard for CR-10S, CR-10S4, CR-10S5, CR-20 (Pro) en Ender-5 Plus
  € 49.50
Hotend kit for CR10 series (1.75 mm)
Creality 3D
Original hotend kit for Creality 3D printers
  € 39.50

Build plates and print surfaces

Original  Ender 3 replacement print sticker|235x235mm
Creality 3D
Replacement stick sheet for Creality 3D Ender 3 / Pro
  € 13.50
CR20 (PRO) Ultrabase carbon build plate ( 235x235x4mm )
Creality 3D
Original CR20 Ultrabase glass sheet upgrade
  € 24.95

SuppliesSupplies

Discover all the parts and accessories that you can use with the CR-20 pro. These products are here to support your project at every step of the way. Select premium supplies that provide expert solutions.

Extruder parts

Silicone sock for MK10 hotend (Black)
Protection against hotend heat dispensation for MK10 and Creality hotends
  € 2.89
Blue Silicone Socks (3pcs)|MK7/MK8/MK9
Micro Swiss
High temperature non-stick silicone socks, compatible with multiple hotends
  € 9.50

Lubrication and maintenance

Super lube ( 7 ml )
Perfect for lubrication of bearings and linear sliders
  € 7.50

UpgradesUpgrades

Boost your CR-20 pro with the necessary upgrades for top performance. Find all the necessary peripherals and components here for a heightened work process. Successfully increase your productivity and assure the highest level of quality!

Ultrabase carbon build plate|235x235x4mm
Creality 3D
Original Ender3 (pro), CR-20 (pro) and Ender5 Ultrabase glass sheet upgrade
  € 24.50
Ender 3 Polypropylene build plate ( 235x235mm )
Creality 3D
Original polypropylene build surface for Creality 3D CR-20 (pro) or Ender 3 (pro)
  € 19.50
All Metal Hotend Kit for Creality 3D printers|1.75mm filament
Micro Swiss
High quality full metal hotend with titanium heatbreak, compatible with MK8 hotends
  € 73.50
BL Touch auto bed leveling kit (V1.0)
Creality 3D
Official upgrade kit for Creality 3D printers with a BL touch sensor for auto bed leveling
  € 49.75

Buildplates

FlexPlate system|235x235 mm
BuildTak
Three parts system for easy print removal and quick change of print surface material
  € 92.50
Standard build surface|235x235 mm / Black
BuildTak
High-quality print surface sheet with adhesive side for reliable 3D printing with different materials
  € 16.50
PEI build surface|235x235 mm
BuildTak
PEI sheet with adhesive side for reliable 3D printing with PETG
  € 21.50
Nylon+ build surface|235x235 mm
BuildTak
PEI sheet with adhesive side for reliable 3D printing with Nylon
  € 22.50

Extruder parts

All Metal Hotend Kit for Creality 3D printers|1.75mm filament
Micro Swiss
High quality full metal hotend with titanium heatbreak, compatible with MK8 hotends
  € 73.50
DDX Copperhead upgrade
Slice Engineering
Upgrade your DDX Direct Drive eXtruder with this DDX Copperhead
  € 114.95
Plated A2 Hardened Steel for MK8|0.4 mm / 1.75 mm
Micro Swiss
High quality 0.4 mm made of A2 plated steel
  € 19.50
Heater Block Upgrade for CR10 with Silicone Sock
Micro Swiss
Set of high-quality heater block and accessories, compatible with different printers
  € 12.50

Copyright 2009 - 2022 | ReprapWorld